2021 Schedule

Sound & Visuals Team Rotations
Date	Sound	Visuals
1/3/2021	Zach	Haleigh
1/10/2021	Rick	Chessie
1/17/2021	Zach & Tony	Kaya
1/24/2021	Mark & Kyle	Chessie
1/31/2021	Zach	Haleigh
2/7/2021	Rick	Chessie
2/14/2021	Zach & Tony	Kaya
2/21/2021	Mark & Kyle	Chessie
2/28/2021	Zach	Haleigh
3/7/2021	Rick	Chessie
3/14/2021	Tony	Kaya
3/21/2021	Mark	Chessie
3/28/2021	Zach	Haleigh

Responsibilities and Steps

	Sound & Visuals Responsibilities/Steps

Sound:
1	Turn on All Sound Equipment (Board and Wireless Microphones)
2	Check Microphone Batteries (Need to Order More Batteries? Let Zach Know)
3	Set Up Audio Recorder USB on Sound Board
4	Play CD or Computer Music Before Service
5	Balance and Operate Sound During Music
6	Control Lights in Sanctuary (Lights down after Welcome; Up at Sermon)
7	Record Sermon Audio on USB (During Sermon)
8	Finalize Audio Recording after Sermon
9	Play CD or Computer Music After Service
10	Turn Off and Put Up All Sound Equipment
11	Give Recorded USB Drive to Mark Ussery

Visuals:
1	Turn On All Visual Equipment (Computers, Camera, Projectors, and DVD Recorder)
2	Place Blank DVD in Recorder (Write on Disk: “Sunday Service, [Date]”)
3	Open Easy Worship, Announcements PowerPoint, and Sermon PowerPoint)
4	Play CD or Computer Music Before Service
5	Play Announcements Slide Show Before Service
6	Begin Recording DVD at Beginning of Service (Make Sure Camera is In Focus)
7	Operate Easy Worship During Music
8	Zoom Camera In at Beginning of Sermon
9	Operate Sermon PowerPoint During Sermon (Pastor will give notes)
10	Operate Easy Worship During Closing Music
11	Play CD or Computer Music After Service
12	Stop Recording DVD, Setup (on remote), Finalize DVD, Place DVD in DVD Stack
13	Turn Off All Visual Equipment (Computers, Camera, Projectors, and DVD Recorder)

Sound and Media Ministry